Overall, the GASTEC Detector Tubes are an effective, efficient, and trusted solution for gas detection needs in Saudi Arabia, UAE, Kuwait, Oman, Qatar & Bahrain.
Gravity is a trusted distributor of GASTEC gas detection products in the Middle East and North Africa region including Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Egypt, Morocco, Tunisia and UAE. Gravity provides excellent pricing and the team at Gravity h for over fifteen years.
The GASTEC detector tube system is a reliable and efficient method for detecting gases and vapours on-site. These thin glass tubes feature calibration scales that enable operators to read concentrations directly, making analysis quick and easy. With a shelf life of almost three years, these tubes are also easy to store. To use, simply connect the tube to the GV-100S/100 LS Gas Sampling Pump, which activates the process. This system is highly versatile, enabling accurate measurement of a wide range of gases and vapours.
The GASTEC Standard Detector Tube System offers numerous benefits for users seeking an efficient and reliable gas detection solution.
With over 600 different gas detection tubes available, this system can analyze airborne gases and vapors as well as pollutants in soil and water.
The pre-calibrated tubes are safe and easy to handle, saving time and delivering quick sampling results.
Other notable benefits of this system include fewer pump strokes required for sampling, resulting in faster results in a shorter amount of time.
Additionally, the system is certified by the Safety Equipment Institute (SEI), ensuring that it meets rigorous safety standards.
The tubes are manufactured in an ISO-9001 certified facility, guaranteeing consistent quality and reliability.
Overall, the GASTEC Detector Tubes are an effective, efficient, and trusted solution for gas detection needs in Saudi Arabia, UAE, Kuwait, Oman, Qatar & Bahrain.
The GASTEC Detector Tube is an ideal solution for anyone who needs to perform on-site gas detection measurements quickly and easily.
It allows for direct reading of measurements due to the calibrated scale printed directly on the tube, making it easy for anyone to use.
The tubes’ sampling volume can be adjusted to obtain an extensive measuring range, allowing for even greater versatility in its use.
To ensure precision and accuracy, each production lot is independently tested and calibrated, and each detector tube is marked with its own quality control number for traceability.
The Tubes also offers a long shelf-life and excellent long-term stability, making it a cost-effective and reliable solution for gas detection needs.
GASTEC Detector Tube System provides an efficient and dependable solution for gas detection in a wide range of industrial usage.
The GASTEC Detector Sampling Pump features a built-in tip breaker that incorporates a diamond edge for maximum durability. This design makes tip breaking easier, safer, and more convenient for users. Discarded tips are conveniently deposited in a storage bin for safe and easy disposal.
The pump piston has been thoughtfully designed with a smaller diameter to reduce the effort required to pull out the handle. This feature makes the pump easy for anyone to operate. The GASTEC Pump meet the stringent leakage test requirements of various global policies and test agencies. The pump shaft is equipped with a red line that indicates leakage rates, ensuring that users can be confident in their measurements. This makes it a reliable and user-friendly solution for gas detection needs.
The pump body is designed for maximum comfort and ease of use. The pump is covered with a soft elastomer material that ensures a firm grip on the pump cylinder, even with wet or gloved hands. The middle portion of the pump body is narrower than the ends, providing a comfortable and secure grip for users. This feature ensures that the pump can be used safely in potentially hazardous environments. The opening of the tube tip cutter is made of chromed stainless steel, further enhancing the pump's durability and reliability.
The pump shaft that indicate the full-stroke (100mL) and half-stroke (50mL) positions. The red line on the pump shaft ensures that the handle is locked at these exact positions, allowing for consistent and accurate measurements.
The gas sampling pump features an automatic stroke counter that can track up to ten pump strokes automatically. This advanced feature helps eliminate the possibility of miscounting, ensuring that measurements are accurate and consistent every time.
1. Start by breaking the ends of the detector tubes and insert one end to the rubber socket.
2. Slowly pull back the piston until the mentioned sampling time
3. You may have to wait a little until the sampling is completed and check the measurement.
We offer extension hoses that can be attached to the gas sampling pump to enable remote downward measurement in confined spaces, such as manholes and tanks. The extension hoses come in three lengths: 5m, 10 m, and 30m.
There are times when we might need to measure hot gases (Above 100 degrees Centigrade) which are emitted from vehicle exhaust. Hot probes are cooling devices which would bring the temperature down to make it ideal for gas detection. This also helps to enhance the stability of the device.
GV-110 gas sampling pump, along with three rubber inlets and lubricant, come packed in a handy shoulder bag along with an instruction sheet. The pump features an automatic sampling counter, which indicates the number of pump strokes completed, although GASTEC tubes generally require fewer pump strokes. This feature helps users keep track of the sampling process and avoid the risk of miscounting. The shoulder bag makes it easy to carry the pump and accessories, making it convenient for use in the field.
The extension sampling pole is a convenient accessory for remote sampling at high locations, such as elevated storage tanks and chimneys. The lightweight fiberglass material makes it easy to carry and handle, and its compact size when retracted allows for easy storage and transportation.
The pole can be extended up to a maximum length of 2.8m, making it suitable for a wide range of sampling applications. The pole also features a universal joint that allows for easy attachment of the gas sampling pump, and an adjustable hand strap for secure handling while in use.
No.70LN is an improved version of the existing No.70L.
This environmentally-friendly version does not contain any mercury substances.
| Scale range | 0.5 - 4 ppm |
| Measuring range | 0.1 - 8 ppm |
| Color change | Yellow -> pink |
| Shelf life | 2 years (Refrigerated storage) |
No.72LN is an improved version of the existing No.72L.
This environmentally-friendly version does not contain any mercury substances.
| Scale range | 0.5 - 25 ppm |
| Measuring range | 0.15 - 57.5 ppm |
| Color change | Yellow -> pink |
| Shelf life | 2 years |
No.75N is an improved version of the existing No.75.
This environmentally-friendly version does not contain any mercury substances.
| Scale range | 2.5 - 50 mg/m3 |
| Measuring range | 1.25 - 250 mg/m3 |
| Color change | Yellow -> pink |
| Shelf life | 2 years |
No.75LN is an improved version of the existing No.75L.
This environmentally-friendly version does not contain any mercury substances.
| Scale range | 1 - 15 mg/m3 |
| Measuring range | 0.5 - 39 mg/m3 |
| Color change | Yellow -> pink |
| Shelf life | 2 years （Refrigerated storage） |
The above tubes need GASTEC automatic air sampling pump Model GSP-300FT-2.
| Scale range | 0.1 - 5 ppm |
| Measuring range | 0.1 - 14.5 ppm |
| Color change | White -> Brown |
| Shelf life | 2 years |